The CXIS-5967 computerized x-ray inspection system is suitable for xray screening oversized packages, pallet screening security inspections, and odd shaped bulky xray screening requirements. This PC based x-ray screening system is easy to operate and ideal for weapon detection, bomb detection, potentially dangerous liquid detection, and other security inspection and contraband detection requirements.
This conveyor based x-ray screening system has a tunnel opening of 59" (1,498mm) wide by 67” (1,701mm) high, incorporates a high resolution x-ray detector array, and latest algorithms to enhance detection and imaging performance. The CXIS-5967 x-ray system incorporates a 180kV generator and will penetrate up to 29mm of steel.
CXIS-5967 Imaging Characteristics
Black & White, Reverse Monochrome, & Pseudo Color
Dual Energy Imaging System
Geometrical Distortion Correction
Color to Gray Scale Imaging
Programmable Zoom 2X to 32X
Edge Sharpening
Programmable Penetration Levels
Automatic Z measurement
Operator Training Program
Density Alert
Organic & Inorganic Imaging
Automatic Image Archiving - 25,000 images
Image Review - Last 50 Images
Variable Contrast Level Control
Dual 17" LCD Flat Panel Color Monitor
Network Compatible
The CXIS-5967 x-ray inspection system can be networked with other x-ray inspection systems for high speed data transmission via Ethernet. It uses a Windows 2000 based operating system running a TCP/IP network protocol system. Images from each CXIS-5967 xray system can be sent through the network to a central server where they are viewed, stored, or printed.
Standard Features
Sensitivity
33 AWG
Spatial Resolution
1.5mm both vertical and horizontal
Penetration
29 mm Steel
Contrast Sensitivity
At least 24 levels visible as measured by a step wedge, 4096 gray level
Dose per Inspection
0.25mR typical
Power Requirements
Single Phase, 220-240 VAC, 50-60Hz
Tunnel Opening
59" (1,498mm) wide by 67” (1,701mm) high
Complete Specifications
X-Ray Generator
Optional Accessories
Voltage
180 kVp
Entry/ Exit Rollers (1.0m or 1.5m long)
Duty Cycle
100%
Exit Table (1.0 m long)
Tube Current
1.0mA
Threat Image Projection (TIP)
Cooling
Sealed oil bath
4-Level Security Access
Filtering
3 mm Al
Screener Training Program
Beam Direction
Upward Vertically
Screener Assist Threat Detection
Remote Operator Workstation
Physical Specifications
Network Supervisor Station
Weight
Approximately 3,050 Kg
Advance Image Archiving (100,000 images)
Shipping Weight
Approximately 3,380 Kg
200kv X-ray Generator
Conveyor Speed
6.0m/min (42 fps)
320k X-ray Generator
Conveyor Height
10" (254mm)
450k X-ray Generator
Conveyor Capacity
1000Kg evenly distributed
3500 kgs Capacity Conveyors
X-Ray Detector
2304 photodiodes in an "L" Shapped configuration
Operating Standards
Complies with published international operational standards including the U.S. Federal Aviation Administration standards, "Use of X-Ray Systems" (Federal Standards 14 CFR 108.17 and 14 CFR 129.26).
Environmental Conditions
Operating Temperature
0°C to 45°C
Storage Temperature
-20°C to 60°C
Processor
Humidity
less than 95% non-condensing
At least a Pentium-IV, 3.0 Ghz with hyperthreading technology, 512MB RAM, Advanced Video Graphics Card with 128MB RAM, 40GB Hard Disk
Design Policy
Health & Safety
American Innovations, Inc. pursues & reserves the right to change specifications at any time without notice in the course of continuous development. Any such changes are implemented to maintain or improve the products offered. Equipment may differ in a small detail from the description given.
Complies with published international health and Safety standards including the U.S. F.D.A. Center for Devices and Radiation Health standards for cabinet x-ray devices (Federal Standard 21-CFR 1020.40). Typical radiation leakage is less than 0.1mR/hr. That is considerably less than the maximum allowed rate of 0.5mR/hr. permitted by Federal law. Film safety is guaranteed for high speed films up to ISO 1600.
